LumberJocks

Reply by mandatory66

  • Advertise with us

Posted on Plane then sand?

View mandatory66's profile

mandatory66

202 posts in 2731 days


#1 posted 09-08-2016 07:54 PM

I see a few answers address using motorized planers & joiners, my question may not have been presented properly. I was asking if many people use sand paper after smoothing a table or board with a hand plane, I am not referring to plane tracks or dull blades or blades with chips in the edge. I can get the board super smooth with the hand plane but when I apply a finish to the board it seems a little rougher than if I had sanded the board. I am using a LN #4 for planing & do not usually need a scraper. (so I think)


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com