Reply by JoeinGa

  • Advertise with us

Posted on Looking for base design for mini pallet jack and cabinet saws

View JoeinGa's profile


7741 posts in 2617 days

#1 posted 09-05-2016 11:19 PM

Using your 1st saw picture to go by…

If you can make the torsion box base so the pallet jack will slide in under the saw body ( I.E. It slides in from the LEFT in your picture) I believe the weight of the saw will counter balance the extended rails.

But if you make it so the pallet jack is gonna slide in from the FRONT you will need to slide it in “off center” to the right to be able to balance the whole shebang. It will take a bit of trial-and-error to figure out just how far to the right it will need to be.

Either way, the torsion box should be able to handle the weight, because most all of the weight will be on the saw end.

-- Perform A Random Act Of Kindness Today ... Pay It Forward

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics