LumberJocks

Reply by helluvawreck

  • Advertise with us

Posted on I need a good miter gauge - what do you think I should get?

View helluvawreck's profile

helluvawreck

32086 posts in 3195 days


#1 posted 07-12-2011 04:11 PM

David, the boxes that I want to make would have tops that are about the size of a standard sheet of printer paper – 8-1/2×11 and maybe in the neighborhood of 6 in. deep. I’m assuming that what you are saying is using the side of the plane guided by a fence that is forty-five degrees to the face and perpendicular to end of the box side. Would you use a spline joint on the miter? And if so would it would you use a linear spline or a crosscut spline? If you didn’t want to accentuate the crosscut splines I would assume you would just use the same wood for the splines as the box (basswood or butternut since box is chip carved).

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com