LumberJocks

Reply by Kazooman

  • Advertise with us

Posted on Screwed (Quite LIterally) By Delta - Once Again

View Kazooman's profile

Kazooman

1324 posts in 2370 days


#1 posted 08-21-2016 11:58 AM

Thanks for the suggestions to ask for hardened screws. I will see if they are available. I just hope that someone has screws like these. They are a bit unusual.

I cannot use Allen head cap screws. The screws go into a bar that presses against the blades to clamp them in place. The whole assembly fits into a slot in the cutter head. You then actually back the screws out so that the top of their heads presses against the side of the slot. The top of the head is not accessible. You have to work from the side and you need a really thin wrench. That is one reason the original stamped wrench failed. It was only about 3/32 thick.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com