LumberJocks

Reply by MrUnix

  • Advertise with us

Posted on What's a good aftermarket tables fence?

View MrUnix's profile

MrUnix

8216 posts in 3056 days


#1 posted 08-19-2016 06:08 PM

Can you measure the distance between the stock holes on the T2/T3 you have ? I would rather not have to drill and tap any holes in the table since I am not really setup to do that.
- Richard

Can’t help with the T3, which is what used to be known as the homeshop model, but the older Biesemeyer manual specifically said that the holes should NOT match the holes on your table top:

These fences can be mounted on just about any saw out there, within reason. The holes in the rail may or may not match your saw. If they don’t, you can drill the table, or you can drill the rail – your choice. It’s easy to do, and as noted above, they do not need to be tapped, just drilled.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com