Reply by Keith Kelly

  • Advertise with us

Posted on Ideas for efficient, space-saving tray

View Keith Kelly's profile

Keith Kelly

330 posts in 2081 days

#1 posted 08-18-2016 04:29 PM

I used bread loaf tins (available at Walmart for 88ยข each. I built large rectangles about 1/4” wider than the tins. I made slots in the verticals on the table saw and the tins slide in and out like a drawer.

I cut the slots first on a wide board, then cut it to size afterwards. In that way I was assured that the lefts and rights line up.

I made several holders in a morning and had them filled in the afternoon.

Here is the loaf tin:

Strong and light, but not perfectly corrosion resistant. The zinc plating is a bit thin, But I only see small spots of rust. But this is much more rugged than the plastic trays out there.

- Cooler

Ooh very nice! I used the same workflow for creating a similar shelf for organizer compartments, cut-in-half school pencil boxes, and drawer dividers. But I have not considered the bread tins – yes, rugged and cheap, drawer style, and single-compartment. Those would slide very nicely. I will surely be using those in the future instead of some of the deeper boxes I was planning on building. Thanks for the tip and link. When you said bread tins for $0.88, I was thinking foil, but those are solid rugged tins.

I’m assuming spray paint would help prevent rust.

-- Keith | Subscribe:

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics