LumberJocks

Reply by Cooler

  • Advertise with us

Posted on Ideas for efficient, space-saving tray

View Cooler's profile

Cooler

299 posts in 1263 days


#1 posted 08-18-2016 04:18 PM

I used bread loaf tins (available at Walmart for 88ยข each. I built large rectangles about 1/4” wider than the tins. I made slots in the verticals on the table saw and the tins slide in and out like a drawer.

I cut the slots first on a wide board, then cut it to size afterwards. In that way I was assured that the lefts and rights line up.

I made several holders in a morning and had them filled in the afternoon.

Here is the loaf tin: http://www.walmart.com/ip/Mainstays-Bread-and-Loaf-Pan-with-Handles/20692196

Strong and light, but not perfectly corrosion resistant. The zinc plating is a bit thin, But I only see small spots of rust. But this is much more rugged than the plastic trays out there.

-- This post is a hand-crafted natural product. Slight variations in spelling and grammar should not be viewed as flaws or defects, but rather as an integral characteristic of the creative process.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com