LumberJocks

Reply by Rick Dennington

  • Advertise with us

Posted on BAND SAW RE-SAW JIG/FENCE

View Rick  Dennington's profile

Rick Dennington

6664 posts in 3706 days


#1 posted 08-13-2016 05:38 AM

Here’s a band saw sled/ jig I made a few years back for my 14” Delta….It’s made of 3/4” MDF, and I mounted a hard wood runner to fit the miter slot in the saw. I then cut a groove on the top side so a miter gauge would fit, also. I mounted a 3/4” piece of Oak the width of the sled to the miter gauge with screws. I think the Oak is about 4” tall, but you can make it as high or low as you want to. It works pretty slick as a re-saw jig. Once you get it set to the thickness you need, just clamp it down to keep it from moving….Here’s a couple of pictures of the sled/jig..

-- " The secret to staying young looking.....hang around old people.." R.D.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com