Reply by MrRon

  • Advertise with us

Posted on Odd sized t-track metric / imperial question

View MrRon's profile (online now)


5566 posts in 3661 days

#1 posted 08-07-2016 08:24 PM

I took this from the Axminister web site.

This is a very useful item that you can use to make your own jigs.
For those of you needing T-bolts to fit this T-Track; do as follows:
take some bolts (I used 8mm – and select suitable length for your project) and grind down the heads so they are thinner;
then grind two shoulders on the inside edge of the bolt heads;
you now have your own T-bolts that only cost a few pence (you need to use a bench grinding wheel).

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics