Reply by Joe Lyddon

  • Advertise with us

Posted on Whacha think about this?

View Joe Lyddon's profile

Joe Lyddon

10809 posts in 4612 days

#1 posted 06-18-2011 09:13 PM


I have never seen a piece of Plexiglass that thick! Must weigh a ton!

That was my first thought… a router table… Then…

That is so thick, you’d be waisting a lot of Router Bit space coming out the top… unless you would be able to Route-out a good amount to mount the Router directly to the PG… I think if you tried to cut-out a space for a Mounting Plate, it would end up weakening it… I really don’t know…

48×48 is really too big for a router table… sure you could make one but, most of it would be wasted space…
A more realistic size would be 24×24 or 24×36…

You could cut it up into smaller pieces… 4 pieces 24×24… or 2 pieces 24×36… and experiment…
I think I would be happy with a 24×24 size… would be easier to clamp stuff to it, etc.

I think you still want to conserve on space don’t you?

Now, for my friendly advice, I could use a piece 24×24… LOL (No, just kidding… I have a router table)

Just my thoughts…

Have fun playing with it!

Just be careful cutting that stuff… a little heat will mess you up FAST literally causing your cut to melt into it’self making it useless. If you could cut it FAST on a band saw… might be better… don’t know for sure.

Thanks for keeping us updated…

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics