LumberJocks

Reply by Kelly

  • Advertise with us

Posted on Circles on the bandsaw...LOTS of tool marks

View Kelly's profile

Kelly

2627 posts in 3550 days


#1 posted 07-29-2016 01:06 AM

I have to sand my circles, but not much. For example, I made a couple thirty inch Susan circles for cabinets over fridges and sanding only took minutes.

Generally and when not re-sawing, I run a 1/4” blade with about 3 TPI. If I wanted a finer cut, I’d go to about ten teeth, proving the material was not over about an inch and a half. Of course, it’s going to make for a much slower cut.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com