Reply by jwmalone

  • Advertise with us

Posted on Remove Scratch from Table

View jwmalone's profile


769 posts in 1241 days

#1 posted 07-25-2016 02:15 AM

Yep paste wax is a good place to start. Urethane could be darn near anything, id use a soft cloth before I went with the 0000 wool just in case, if it doesn’t work no harm no foul. Thing is if you can feel it that means there is a vertical plane to the finish were the scratch is, which is rough and faceted like a diamond sorta, if you fold up some 0000 wool and use your thumb nail to run it through the scratch to smooth out the insides then wax it, that helps hide it a lot better don’t know if that makes sense but think about, it works or helps anyway. Learned that from an 82 year old pro. Of course you could always break out the hand plane flatten it and refinish it, that’s my favorite op.

-- "Boy you could get more work done it you quit flapping your pie hole" Grandpa

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics