Reply by SeanIUOE150

  • Advertise with us

Posted on Delta 36-5000 model tablesaws

View SeanIUOE150's profile


4 posts in 1643 days

#1 posted 05-04-2016 01:23 PM

I would recommend the Laguna Fushion. I purchased mine in February of this year and it has been a great saw.

When I got the saw and started the assembly of the saw it went together well. Only one corner of the extension table had to be shimmed to make it dead flat.

The blade was only a couple thousandths out of alignment with the miter slot. So I adjusted it accordingly. The cuts it has produced have been nothing short of awesome.

It seems everyone gets hung up on the two piece front rail of the fence. I haven’t had any alignment issues because of it. I do recommend to wax the rail so the fence slides easier.

Genuinely the only complaint I have had so far is the factory insert that came with the same. It was garbage, but I’ve been making my own with mdf and it’s been fantastic since pitching the factory one.

Dust collection has been good this far. The power of the saw is great and is more then adequate for my needs. The built in wheels are a nice feature for me because I park and work in my garage.

I’d hold out for the Fushion, but I’m biased.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics