Reply by lew

  • Advertise with us

Posted on Drilling holes precisely

View lew's profile


12840 posts in 4233 days

#1 posted 04-30-2016 06:30 PM

It might be that the quill race has some slop in it. Wiggle to chuck (side to side and forward to back) when the quill is fully retracted and again when the quill is lowered to almost its’ full range. If there is movement in to chuck, when lowered, that could be the reason the holes are not perpendicular.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics