Reply by pintodeluxe

  • Advertise with us

Posted on I'm Stumped - Weird Table Saw Behavior

View pintodeluxe's profile


6158 posts in 3591 days

#1 posted 04-26-2016 03:22 PM

If only the end of the board is out of square, I wouldn’t suspect blade or fence issues.
Usually it is due to the board dropping down as it becomes unsupported on the outfeed side. At the same time, you are referencing less and less of the fence against your workpiece, so there is a tendency for the board to move sideways as well. If you don’t use an outfeed table, try adding one. If you already use an outfeed table, try adjusting it level with the TS surface. I use adjustable furniture leveling feet on my outfeed table to set it just where it needs to be.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics