LumberJocks

Reply by unbob

  • Advertise with us

Posted on Blade marks from the table saw

View unbob's profile

unbob

810 posts in 2684 days


#1 posted 04-18-2016 03:00 PM


Re check for the fence to blade for parallel a little closer. I ll bet this is the problem. Don t try to eyeball it. You can use a dial indicator or a block of wood for reference. Measure to the same tooth front and back. Set the fence 2-3 thou more at the back of the blade.

If this checks out, then use a dial indicator and check the arbor for run out.

- rwe2156


This is what I also do, I can get good results with the cheap blades.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com