LumberJocks

Reply by knotscott

  • Advertise with us

Posted on Blade marks from the table saw

View knotscott's profile

knotscott

8382 posts in 4145 days


#1 posted 04-18-2016 09:25 AM

No saw blade will give truly finish-ready cuts, but good TS setup and good blade selection can help. Plan on at leaTipst some light sanding prior to adding stain/clear coats. Stock saw blades are notoriously poor performers, and most cheaper blades at the homecenters are similar. You can do better with reasonable cost blades like the Irwin Marples series at Lowes, or the Freud Diablo series at HD, DeWalt Precision Trim, CMT ITK Plus, or even the Oshlun line. For more money, you can get even better blades from Freud Industrial or Premier, CMT Industrial, Infinity, Amana, Forrest, Ridge Carbide, Tenryu. Guhdo, etc. Plan on spending at least $30 on a decent blade.

Tips for Picking Saw Blades (and improving saw performance)

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com