LumberJocks

Reply by ROB_IN_MN

  • Advertise with us

Posted on Blade marks from the table saw

View ROB_IN_MN's profile

ROB_IN_MN

35 posts in 2924 days


#1 posted 04-18-2016 02:42 AM

getting sawmark-free cuts is kind of the holy grail. the higher the number of teeth on the blade, the less marks you get, but also the longer it takes to make a rip-type cut.

Most people use a high tooth count blade for cuts across the grain (called crosscuts) and a lower tooth count blade for going with the grain (called rip cuts).

there are blades that are called ‘glue line’ blades that are marketed as giving a very smooth cut that can be directly glued and have no need for sanding. have never tried one, but they sound too good to be true.

as for sanding affecting the squareness, that’ll improve with time as you do more sanding. that’s really the only help for it.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com