Reply by drewnahant

  • Advertise with us

Posted on How do I clamp 2 pieces that are 10 ft long?

View drewnahant's profile


222 posts in 3694 days

#1 posted 02-22-2011 04:12 AM

take some scrap boards and make up some hook extensions, just take a 16” board, glue and screw a 2” block to one end, and another block to the other end on the opposite side, to get a one foot extension. I know you need 2 feet, but I would put one of these at each end of each clamp so it sits straight, rather than one end being flat, and the other raised on the extension. if your plywood isn’t going to be a finish surface, you can simply screw on a few blocks near the seam and clamp them together.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics