Reply by William

  • Advertise with us

Posted on Noise from scrall saw

View William's profile


9950 posts in 3760 days

#1 posted 01-28-2011 02:19 PM

I’m a little confused as to what you’re talking about. I’ve never seen an accessory table to use a jig saw as a scroll saw. Are you referring to a jig saw as a small handheld reciprocating saw? Photos of the saw in question may help.
Also, as far as the scroll saw goes, it depends on what scroll saw you buy. Some saws are very quiet, except for when the blade breaks. The only time my Delta SS250 makes much noise at all is when the blade breaks, and that’s just for that second or two between the actual time it breaks and the time I hit the foot switch to stop it. There are some higher end saws that have a feature that allows the upper arm to swing up when the blade breaks, eliminating that noise as well.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics