LumberJocks

Reply by conifur

  • Advertise with us

Posted on Calculating board feet when board will be used in their side?

View conifur's profile

conifur

955 posts in 1452 days


#1 posted 02-29-2016 01:23 AM



BDFT is calculated AS IF things were really 1, 2, 3, 4, etc. 4//4 = 1… 8/4 = 2 for BDFT calculations…

Building wise, figure the real dimensions… not the make believe ones… LOL Right?

If you rip em using a band saw, you will not wast 1/8” per cut… You must figure kerf size and get the boards wide enough to give you the least amount of waste. If using a 1//8” kerf, figure 1/4 for cleanup,,, so 3.25” strips is what you should figure on… 6.5”(2), 9.75(3), 13”(4) widths…

- Joe Lyddon


-- Knowledge and experience equals Wisdom, Michael Frankowski


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com