LumberJocks

Reply by hotbyte

  • Advertise with us

Posted on Delta 36-725 riving knife adjustment question

View hotbyte's profile

hotbyte

1000 posts in 3484 days


#1 posted 02-12-2016 09:17 PM

No, it is supposed to be as shown in pic 2 when locked. If you push down on it until tight and you can’t move RK from side to side you are good. If you push down and it goes past the lobs on the cam locks and back to the position where the indents line up, it would release all pressure on the RK and the RK would be loose again. Then I think you would need to tighten the nut knotscott pointed out.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com