LumberJocks

Reply by Cooler

  • Advertise with us

Posted on Pin Nailer

View Cooler's profile

Cooler

299 posts in 1444 days


#1 posted 02-05-2016 07:41 PM

I used to assemble picture frames with cross pinned corners. I used conventional brads and pre-drilled. It is probably your only sure way to avoid splitting.

The drill bits snap easily so you need to buy several at a time. United Manufacturers Supply sells them very cheaply along with the wire brads.

See: http://www.unitedmfrscatalog.com/lg_display.cfm/catalog/Catalog_772_Revised/page/62

and: http://www.unitedmfrscatalog.com/lg_display.cfm/page/19/catalog/Catalog_772_Revised

Here is the price list: http://www.unitedmfrs.com/cart/price_list.cfm

you need to look up the part number on the price list. It is a pain to use but their prices are very good.

-- This post is a hand-crafted natural product. Slight variations in spelling and grammar should not be viewed as flaws or defects, but rather as an integral characteristic of the creative process.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com