LumberJocks

Reply by REO

  • Advertise with us

Posted on G0715p alignment issues as explained by Grizzly

View REO's profile

REO

929 posts in 2458 days


#1 posted 12-26-2015 07:22 PM

it appeared the trouble was the voltage of the new circuit not the amperage which as you have stated would be 28 full load on 110v. this is full load current.The same cut will require the same amperage whether it is made on a two horse motor or a three horse motor. the three horse is capable of supplying more than the 2 horse but they use the same power for the same cuts. a three horse can be successfully used on 20 amps with no more chance to blow the breaker than a 2 horse which takes 20 amps at 110v.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com