Reply by Midway

  • Advertise with us

Posted on Dewalt 734 undercut

View Midway's profile


62 posts in 1508 days

#1 posted 10-04-2015 01:34 PM

I have the planer mounted on a 5’work bench. the planer is mounted in the middle with 2’ of table on each end
the 2’ tables on each end are mounted with 4 ea bolts to adjust the tables up and down. I have tried all the
ups and downs of the tables, but when i think i have the problem solved it startts haponeing again.

The best way that i have found is like youall said a piece of wood in front and behind the board being cut.

It is just a cheeep planer so i will have to live with it.

ps: I have made a jig to hold the cutting blades so i can sharpen them with a big hone stone.

-- Midway wichita,ks.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics