LumberJocks

Reply by Jim Jakosh

  • Advertise with us

Posted on Using a buffing system

View Jim Jakosh's profile

Jim Jakosh

26095 posts in 4164 days


#1 posted 09-12-2015 12:48 AM

Hi Jamie. i have the Beall buffing system and a video came with it. You can veiw the video on line under Beall. I was surprised how you use them. I don’t think you can see any of th4e compound on the wheels. I know they sure throw the threads when they are new.
anyway, the video says to load the Tripoli wheel up good and bear down on the part all over buffing with good pressure. Then you lightly load up the whit diamond wheel and buff the part which I think they said removes any tripoli left on it. That is a once over pass,

Then you lightly load the was wheel and give the part a quick buff not dwelling on it or going over a lot.

I have experimented with different kids of raw wood and finished wood and some raw wood buffs better than others. you just have to try out the special you have to see the difference. Also. on a finished part, let the finish dry good before buffing. I waited at least 4 days.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com