LumberJocks

Reply by jerkylips

  • Advertise with us

Posted on Looking for suggestions -

View jerkylips's profile

jerkylips

495 posts in 3646 days


#1 posted 09-03-2015 08:13 PM



It s hard to say. Get some scrap that s the same as you re going to use for the build and give it a whirl.

The biggest issue I see with your plan is end grain. Plywood end grain looks like plywood unless you edge band it or prep it with drywall mud or something similar. If you re not going to edge the plywood, you re not going to be able to hide all the edges. If you cut the shallow kerfs to give the appearance of separate boards, it s going to be obvious that they re not separate boards on the ends. Even with cutting the kerfs, it s not really going to look like separate boards because you re going to have matching grain. I d be afraid it s just gonna look like plywood with kerfs cut in it. If you do decide to go that route, you might consider ripping the ply into 4-6” strips and “mixing” them up to break up the grain pattern. I think that would give a much more convincing look than the kerfs. You ll still have to live with the end grain though.

- HokieKen


I was thinking about the end grain issue too…I could miter it, but…yeah, not sure.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com