LumberJocks

Reply by MT_Stringer

  • Advertise with us

Posted on New woodworker - new planer and jointer - question on cutting board

View MT_Stringer's profile

MT_Stringer

3183 posts in 3710 days


#1 posted 05-15-2015 02:12 AM

Well…if you screwed up and made the board the wrong size, I would rip it into two or more pieces to make smaller ones you can plane properly. Then with your new experience at gluing up boards, you can re-do it with a new glue up. Just make sure the long side is a little less than the width of your planer.

Here is one I made, but I must admit I used a drum sander to sand it smooth after the glue up.

http://lumberjocks.com/projects/94775

-- Handcrafted by Mike Henderson - Channelview, Texas


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com