Reply by SirIrb

  • Advertise with us

Posted on Is the Domino worth it

View SirIrb's profile


1239 posts in 2237 days

#1 posted 04-08-2015 01:00 PM

Ok, ill start by saying I havent used this tool and dont have a dog in the hunt for or against it. If your money is coming via cabinets then the best way you can manufacture faceframes with speed and stability is to buy a good pocket hole cutter. I used the PC 552. No longer in production but a very good tool if you can get a used one. if this is just furniture then the Domino may be the tool for you.

I write this based on the assumption that there is not many ways you can knock out faceframes faster than pocket holes and not as a suggestion against the Domino. You can use a double dowell boring machine and pin the dowells with 5/8 brads with glue but that still isnt as fast as pocket holes.

-- Don't blame me, I voted for no one.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics