Reply by jcecil

  • Advertise with us

Posted on Table Saw, Jointer and Dust Colloctor? Which one!

View jcecil's profile


40 posts in 4707 days

#1 posted 10-19-2009 01:46 AM

Well given the specs you state. I would suggest to following:

TS – Grizzly 10” cabinet saw. I think given the price point you would get the most features and a good saw. I just saw they are having 25% off some of them right now and their shipping is fast and fairly good price.

Jointer – Tough one, I would suggest getting the Grizzly TS at 890 and xfer the 110 bucks to the jointer to give you more ability to buy a better one. As for 6” I had the Ridgid one and it was exceptional and with a 10% off Home Depot coupon isn’t bad price. Now I have an 8” Grizzly and dream to have a 12” or 16” hahaha.

Dust Collector – I have the Delta 50-760
It is a good one in terms of specs. You can certainly get it around 350 including shipping (used to be even less) to which I again say take the 150 and put towards jointer. You may then be able get an 8” (if space allows) or a really nice 6”.

One last question: do you have a planer? or not interested? I personally cannot imagine having a jointer and no planer but I only buy lumber in the rough. and truthfully it doesn’t take a ton of lumber purchasing to make the jointer and planer paid for in savings over buying S4S lumber. Just my thoughts good luck and enjoy.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics