Reply by MT_Stringer

  • Advertise with us

Posted on Kreg Pocket Hole Jigs

View MT_Stringer's profile


3183 posts in 3711 days

#1 posted 01-27-2015 11:21 PM

I have been thinking about getting into pocket hole joinery and I am wondering what Kreg jig to get. There seems to be so many. My main focus will be to make face frames for cabinets. I can t decide between the K4 and the R3. There are quite a few others that I would consider, I am just baffled by all of the choices. Any advice from experienced pocket holers would be appreciated.

- bondogaposis

I suggest you get the one with the handle on the operator’s side. reaching over or around the cabinet carcases to clamp the workpiece is a pain. I had to get my wife to operate the clamp so I could keep from scraping my arm (I am on blood thinners).

Good luck.

-- Handcrafted by Mike Henderson - Channelview, Texas

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics