Reply by alittleoff

  • Advertise with us

Posted on What do you use to coat your Saw/Power tool table surfaces?

View alittleoff's profile


541 posts in 1754 days

#1 posted 01-07-2015 12:53 AM

Ive got a can of the johnson paste wax same as Kdc68 posted a picture of. When I bought my saw about a month ago I cleaned it and put a coat of the wax on. About a week ago I went to the shop to find my saw table top covered solid with rust. Since then after cleaning it up I put motot oil on the top to keep it from rusting again. My shop has no heat and it had rained for two days. There was a lot of humidity also. I don’t know if I may have buffed the wax off or maybe didn’t put enough on the top, but it was a lot of rust and I don’t want it to happen again. I also don’t want to clean the oil off it every time I use the saw. Did I not do it right, is there a trick to the Johnson wax or what. All help appreciated
Thanks Gerald

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics