• Advertise with us
Project by AKDave posted 04-12-2014 02:01 AM 1845 views 0 times favorited 1 comment Add to Favorites Watch

Another request from the wife—a potted plant stand. Made from redwood. The top was sawn on the bandsaw with a great circle cutting jig from The column was turned on the Grizzly lathe. I had never turned redwood before and was pleasantly surprised. I thought is turned very well. The top brackets and feet were first joined with a sort of bridal joint. Then grooves were cut in the column for the crossed pieces. Used a stacked dado on the table saw for the grooves. Oiled up with Watco Natural Danish oil, and a wipe on poly finish. You can get some great grain patterns in Redwood and the three tops show.

-- AKDave Chugiak, Alaska, [email protected]

1 comment so far

View SuburbanDon's profile


487 posts in 3596 days

#1 posted 04-16-2014 12:34 AM

Looks good !

-- --- Measure twice, mis-cut, start over, repeat ---

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics