Project by djnphoto | posted 04-08-2014 01:36 AM | 1272 views | 0 times favorited | 2 comments | ![]() |
![]() |
| |||||||
|
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
2 comments so far
PRGDesigns
home | projects | blog
246 posts in 2873 days
#1 posted 04-08-2014 02:41 AM
What was the cut time? Which bit(s) did you use? I am assuming Vectric software? Thanks in advance for any consideration you can give this matter.
-- They call me Mr. Silly
djnphoto
home | projects | blog
47 posts in 3042 days
#2 posted 04-08-2014 01:02 PM
The Rough cut was 1hr with a 1/4 round over bit and the finial pass was 3hr 45 min with a 1/16 round over bit I use Vectric Aspire 3.0 with Mach 3 on my KL 6090 CNC I used MDF for this as I get it for free from work. I plan on doing this in Oak soon
-- DJNPHOTOWOODWORKING
Have your say...