picnic table condiment holder

  • Advertise with us
Project by triviasteve posted 04-06-2014 07:48 PM 1861 views 9 times favorited 3 comments Add to Favorites Watch
picnic table condiment holder
picnic table condiment holder No picture No picture No picture No picture No picture
Zoom Pictures

the picnic table condiment holder… from

A few things… the table top and benches should be 10 1/2”, and if I make another one, I’ll add a brace at the top for either side of the legs, and extend the brace for the bench, but cut at an angle \_/ to support the benches a little bit better.

Also a tip if you want to make these… cut your legs and then tape them together and sand them all as 1 unit to make sure that the angles are consistent among all of your parts.

A fun project made from western red cedar.

condiment bottles purchased from my local restaurant supply house. They’re 8 oz bottles that you can pick up for about $0.90 a piece.

-- You know I'm on the level 'cause my bubble's in the middle.

3 comments so far

View rodman40's profile


166 posts in 3096 days

#1 posted 04-06-2014 11:37 PM

That web site has a lot of cool plans, thanks like your post.

-- Rodman

View hoss12992's profile


4171 posts in 2661 days

#2 posted 04-07-2014 05:18 PM

This is really cool. Great job

-- The Old Rednek Workshop

View Fishinbo's profile


11362 posts in 2944 days

#3 posted 04-11-2014 02:09 PM

Cool condiment holder, a fun and useful to bring on picnics. Great job!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics