LumberJocks

Endgrain...

  • Advertise with us
Project by degoose posted 04-05-2014 09:34 PM 2704 views 2 times favorited 21 comments Add to Favorites Watch

Rosewood and Jarrah…
4 way book match…kinda
Last pic is the random orbital sanding… shows the grain before oiling..

-- Don't drink and use power tools @ lasercreationsbylarry.com.au





21 comments so far

View shopdog's profile

shopdog

581 posts in 4397 days


#1 posted 04-05-2014 09:46 PM

Great pattern…good to see you making boards again.

-- Steve-- http://www.urbanexteriors.biz

View Gary's profile

Gary

9416 posts in 4345 days


#2 posted 04-05-2014 09:48 PM

Hot Dang, Larry That is super sweet. I’d sure like to see how you did that one.

-- Gary, DeKalb Texas only 4 miles from the mill

View SPalm's profile

SPalm

5336 posts in 4794 days


#3 posted 04-05-2014 09:56 PM

Hey Larry,
That’s sweet. Glad to see some boards are still being made.
I bet it was debated on how to end the repeating 4 way match – with a 4 way on each end, or a split on each end. I think you chose wisely with the split.

Steve

-- -- I'm no rocket surgeon

View lanwater's profile

lanwater

3113 posts in 3846 days


#4 posted 04-05-2014 10:02 PM

Oh man! oh Man!

This is beautiful Larry

Quite a match.

-- Abbas, Castro Valley, CA

View a1Jim's profile

a1Jim

118143 posts in 4489 days


#5 posted 04-05-2014 10:15 PM

Totally cool ,a real eye popper .

-- https://www.artisticwoodstudio.com/videos

View Monte Pittman's profile

Monte Pittman

30576 posts in 3250 days


#6 posted 04-06-2014 12:02 AM

That’s really awesome work

-- Nature created it, I just assemble it.

View ScottKaye's profile

ScottKaye

787 posts in 2865 days


#7 posted 04-06-2014 12:37 AM

Very nice Degoose. I watched your class on the subject and found it to be very well done. I have one last project on the bench (routing key holes in a display case) and Ill be working on my first end grain. I have one question for you. Do you think you can really get 170 Australian dollars for that board? (i did the conversion its about $157 US dollars) That would be outstanding if you can!

Scott

-- "Nothing happens until you build it"

View KnotCurser's profile

KnotCurser

2037 posts in 3980 days


#8 posted 04-06-2014 01:03 AM

Larry,

Making end-grain boards again – fantastic!

That’s a lot of sandpaper you are using – if you only had a CNC Machine, you could possibly chuck a larger, ballnose bit and take maybe a thou or two off the entire top surface to make it perfectly smooth…......

Now where could you get a CNC from??? Hmmmmmmm…...........

;-)

Cheers!

-bob

-- Robert Rhoades WoodWorks / Email: [email protected] / www.rhoadesclan.com

View JL7's profile

JL7

8776 posts in 3877 days


#9 posted 04-06-2014 02:05 AM

That’s a real beauty Larry…..nice work…..

-- Jeff .... Minnesota, USA

View kdc68's profile

kdc68

2991 posts in 3188 days


#10 posted 04-06-2014 02:08 AM

Handsome board ! Thanks for sharing

-- Measure "at least" twice and cut once

View hoss12992's profile

hoss12992

4177 posts in 2805 days


#11 posted 04-06-2014 02:10 AM

WOW

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View matt garcia's profile

matt garcia

1921 posts in 4584 days


#12 posted 04-06-2014 02:21 AM

That is AMAZING!!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Napaman's profile

Napaman

5533 posts in 4989 days


#13 posted 04-06-2014 04:31 AM

That shot of the board before finish is great to see the difference. ..very nice…

-- Matt--Proud LJ since 2007

View Joe Lyddon's profile

Joe Lyddon

10951 posts in 4964 days


#14 posted 04-06-2014 05:14 AM

Very COOL grain!

Nice!!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: https://www.ncwoodworker.net/forums/index.php?media/albums/users/joe-lyddon.1389/

View oldnovice's profile

oldnovice

7681 posts in 4279 days


#15 posted 04-06-2014 06:27 AM

$170 AUD, $157 USD, not too bad, hope you get it as it is well worth every penny.

-- "It's fine in practise but it will never work in theory"

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com