TV Stand

  • Advertise with us
Project by Wiscobuilder posted 04-03-2014 04:06 PM 1646 views 1 time favorited 2 comments Add to Favorites Watch

This is a console table made to hold a large flat screen TV. It came from the plans found here:

It is made of pine and stand 2×4 and 2×6 studs. The only change I made was the top per the plans had the 2×6 running the long way but because of the big box store wood twisting I chose to cut them short and turn them. This allowed the stand to sit much flatter to the floor.

It is finished with Minwax ebony stain.

Thanks for looking

2 comments so far

View Josh's profile


1234 posts in 3901 days

#1 posted 04-03-2014 11:46 PM

I like that top better than if they were the other way. Mixes it up, ya know?

-- Tree, wood, and box lover from Pennsylvania

View Bill729's profile


241 posts in 4414 days

#2 posted 04-06-2014 01:23 AM

I like it, but I don’t think you’ll ever be happy until the boards on top run the other way.

Besides looking for a better source of lumber, check it maybe a local cabinet shop can “dimension” the boards for you—run them through a jointer and planer. If you ask right, they might do it really cheap.

Bill Whig

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics