LumberJocks

On maple...

  • Advertise with us
Project by degoose posted 03-26-2014 08:25 AM 2043 views 0 times favorited 27 comments Add to Favorites Watch
On maple...
On maple... No picture No picture No picture No picture No picture
Zoom Pictures

Had a request to laser a photo onto timber… I chose Maple..

-- Don't drink and use power tools @ lasercreationsbylarry.com.au





27 comments so far

View robscastle's profile (online now)

robscastle

6101 posts in 2589 days


#1 posted 03-26-2014 08:35 AM

Brilliant work Larry
excellent detail in both the image and the timber grain.

I see they are military people so what’s the story behind the award?

-- Regards Rob

View Ken90712's profile

Ken90712

17671 posts in 3574 days


#2 posted 03-26-2014 08:47 AM

Larry great work, Such details… Love it.

-- Ken, "Everyday above ground is a good day!"

View Monte Pittman's profile

Monte Pittman

30349 posts in 2723 days


#3 posted 03-26-2014 09:11 AM

Good choice with the maple. Good job.

-- Nature created it, I just assemble it.

View Karson's profile

Karson

35188 posts in 4786 days


#4 posted 03-26-2014 11:37 AM

Very good Larry.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected]

View BobWemm's profile

BobWemm

2670 posts in 2311 days


#5 posted 03-26-2014 11:53 AM

That is a great result, all I need now is a laser. + all the other things on my wish list.
Shows that anything is possible.

Thanks for showing.
Bob.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View amagineer's profile

amagineer

1415 posts in 2982 days


#6 posted 03-26-2014 12:14 PM

The clarity of the laser-ed picture is amazing.
-don

-- Flaws are only in the eye of the artisan!

View Gary's profile

Gary

9397 posts in 3818 days


#7 posted 03-26-2014 01:35 PM

That is so cool…..

-- Gary, DeKalb Texas only 4 miles from the mill

View helluvawreck's profile

helluvawreck

32086 posts in 3252 days


#8 posted 03-26-2014 01:39 PM

This is nicely done, Larry. Those lasers are amazing.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View DrDirt's profile

DrDirt

4555 posts in 4127 days


#9 posted 03-26-2014 01:54 PM

Hey Larry – as you are playing with it, do you find that you get better results if you laser engrave wood that already has the finish on it?
Or do you burn the raw wood then lacquer the panel later

-- “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 2678 days


#10 posted 03-26-2014 02:43 PM

Unbelievable what you can (or should I say what you are) doing with a laser engraver. Very nicely done.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View woodpeckerbill's profile

woodpeckerbill

205 posts in 3659 days


#11 posted 03-26-2014 03:01 PM

Such clarity! Great job!!

View hoss12992's profile

hoss12992

4145 posts in 2278 days


#12 posted 03-26-2014 04:14 PM

That is really cool. Great job

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View lanwater's profile

lanwater

3111 posts in 3319 days


#13 posted 03-26-2014 04:36 PM

It reminds me of those old photographs we used to have.

Looks great.

-- Abbas, Castro Valley, CA

View Joe Lyddon's profile (online now)

Joe Lyddon

10605 posts in 4438 days


#14 posted 03-26-2014 04:50 PM

Good Choice…

Good Job!

COOL work!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View cajunpen's profile

cajunpen

14578 posts in 4451 days


#15 posted 03-26-2014 04:51 PM

Great looking project – you have that Laser mastered I see.

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/

showing 1 through 15 of 27 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com