Project Information
This is a K-cup holder Lazy Susan I made for my sister for her birthday. I took the example of other Lumberjocks but added my own fruits of the Spirit embellishments. Made out of Red Oak and finished with clear poly.
Top and bottom 5.5" by 5.5" by 1/2" thick
Sides are 4.5" by 10" by 1/4" thick
Routed the edges for a rabbit joint to glue the sides.
I used a 3/8 round-over bit for the top and bottom
I used a 1/4 straight router bit to carve out a dado joint to glue the sides to the top and bottom.
Used a 1 7/8" Forstner bit for the holes.
Used a 3" lazy Susan
I hope she likes it.
Top and bottom 5.5" by 5.5" by 1/2" thick
Sides are 4.5" by 10" by 1/4" thick
Routed the edges for a rabbit joint to glue the sides.
I used a 3/8 round-over bit for the top and bottom
I used a 1/4 straight router bit to carve out a dado joint to glue the sides to the top and bottom.
Used a 1 7/8" Forstner bit for the holes.
Used a 3" lazy Susan
I hope she likes it.