Jig Adjust the Angle

  • Advertise with us
Project by Miro Amancio posted 03-03-2014 03:43 AM 6504 views 51 times favorited 21 comments Add to Favorites Watch

Good Night, Friends.
In need to make a jig to adjust the angle on the guide edging
chisel and planer blade.
I wanted to make a compact as well as wanted to keep along with the
accessories for edging.
Used Cumaru, Itauba and a piece of shoelace.
I ended up with this result, hope you like:


21 comments so far

View Nicky's profile


698 posts in 4895 days

#1 posted 03-03-2014 04:04 AM

Slick. Great idea!

Thanks for sharing.

-- Nicky

View waho6o9's profile


8917 posts in 3380 days

#2 posted 03-03-2014 04:15 AM

Excellent design, I like how you can square up
the cutting edges, very good.

View shipwright's profile


8570 posts in 3601 days

#3 posted 03-03-2014 04:30 AM

What a good little rig!
I’ve been planning to make something like this and now I won’t have to design it myself. ....... Thanks.

It will fit perfectly in this. .. Favorited.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese!

View BJODay's profile


528 posts in 2746 days

#4 posted 03-03-2014 04:39 AM

Good idea. I’ve been using a small block of wood but it is only good for my chisels at 30 degrees. I like the adjustability of you jig.


View TopamaxSurvivor's profile


19336 posts in 4479 days

#5 posted 03-03-2014 06:48 AM

Great idea!

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View steve_in_ohio's profile


1195 posts in 2414 days

#6 posted 03-03-2014 10:55 AM

what a cool idea

-- steve, simple and effective

View Belg1960's profile


1111 posts in 3869 days

#7 posted 03-03-2014 01:11 PM

Could you share the measurements for the grooves? This will give me a much more consistent sharpening edges. Thanks for sharing this. Pat

-- ***Pat*** Rookie woodworker looking for an education!!!

View BrandonGonzales's profile


8 posts in 2671 days

#8 posted 03-03-2014 04:58 PM

That’s a great idea! I’ve seen plenty of blocks for setting the blade angle, but I’ve never seen an adjustable one. I’m adding that to my to-do list. It would be a perfect idea to submit to a magazine, you should seriously consider it!

View NormG's profile


6506 posts in 3807 days

#9 posted 03-03-2014 06:21 PM

Very creative idea

-- Norman - I never never make a mistake, I just change the design.

View a1Jim's profile


118084 posts in 4381 days

#10 posted 03-03-2014 06:59 PM

very good thinking ,good idea.


View hoss12992's profile


4172 posts in 2696 days

#11 posted 03-03-2014 08:31 PM

That is really cool. Thanks for sharing

-- The Old Rednek Workshop

View HillbillyShooter's profile


5811 posts in 3096 days

#12 posted 03-03-2014 11:06 PM

Good idea.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View OhValleyWoodandWool's profile


970 posts in 3924 days

#13 posted 03-04-2014 12:25 AM

Very good

-- "All you need in this life is ignorance and confidence, and then Success is sure." Mark Twain

View MakingCurls's profile


43 posts in 2382 days

#14 posted 03-04-2014 01:11 AM

great idea. just what i need

-- Out in the shed making curls

View Miro Amancio's profile

Miro Amancio

19 posts in 3050 days

#15 posted 03-04-2014 03:03 AM

Thank you all for having enjoyed my jig.

The measurements for the grooves l depend on the honing guide you have.


showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics