Project by chadgr | posted 01-25-2014 08:44 PM | 1619 views | 0 times favorited | 2 comments | ![]() |
![]() |
Made from Sapele and Hard maple scraps, the bar measures 300mm it is very accurate for a homed square as shown by the image (The flip test, draw a line flip it draw a parallel line) There two lines only draw in at 300mm which is more than accurate enough for my needs. A Sketchup plan is available please just email me, [email protected] and I will send you the model. I have pinned the corners so that it can’t move out of square. It is built using a layering method, kind of like a sandwich, two outer layers sandwich the bar in the middle.
Thanks for viewing hopefully you will build one too.
Chad
-- Chad Griffiths Vist my Etsy Shop https://www.etsy.com/uk/shop/Everythingwood1?ref=si_shop
2 comments so far
wseand
home | projects | blog
2796 posts in 3609 days
#1 posted 01-25-2014 10:33 PM
Nicely done. I am going to send you an E-mail.
Fishinbo
home | projects | blog
11362 posts in 2743 days
#2 posted 01-30-2014 03:01 PM
Great use of scraps and that’s one helpful tool around the shop. Well done!
Have your say...