French wall mount rolling pin.

  • Advertise with us
Project by RussellAP posted 01-20-2014 10:01 PM 2248 views 1 time favorited 3 comments Add to Favorites Watch

I don’t usually get much business off Facebook, but I have one customer that wanted this. She sent me a picture of it. Mine is the first one, the original picture she sent me is the one with the picture in the background.
I made it from solid walnut.

Took a couple hours and a cut thumb, but not a bad way to make $85.

Thanks for looking.

-- A positive attitude will take you much further than positive thinking ever will.

3 comments so far

View Brett's profile


951 posts in 3324 days

#1 posted 01-20-2014 11:45 PM

Nice! I would like to make one of these soon. I actually turned a blank for one but it had already split too deep into the piece from drying out. Someday.

-- Hand Crafted by Brett Peterson John 3:16

View RussellAP's profile


3105 posts in 2852 days

#2 posted 01-20-2014 11:47 PM

Brett, I used three pieces of walnut glued up to keep the pin from cracking and warping. Two pieces would have been fine, but I wanted to be sure to get the girth I needed.

-- A positive attitude will take you much further than positive thinking ever will.

View lew's profile


12901 posts in 4320 days

#3 posted 02-08-2014 10:40 PM

That’s a beauty!
I just made some pins using walnut. I believe I prefer it over Sapele although Sapele does have more consistant coloring.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics