LumberJocks

Arch Raised Panel Bookshelfs

  • Advertise with us
Project by JerseyJoe posted 08-30-2008 05:15 AM 1760 views 1 time favorited 9 comments Add to Favorites Watch
Arch Raised Panel Bookshelfs
Arch Raised Panel Bookshelfs No picture No picture No picture No picture No picture
Zoom Pictures

The most difficult piece of this project was the Arches. They are raised panels and the ends where the two points meet had me worried from the word go. I used a raised panel bit and it wanted to rip the wood when the two points met.

In the end the customer was happy and that was the most satisfying.

- Joe Massanova

-- Joe Massanova, Somerdale, NJ - www.novawoodworking.com





9 comments so far

View Lee A. Jesberger's profile

Lee A. Jesberger

6866 posts in 4341 days


#1 posted 08-30-2008 05:27 AM

Hi Joe;

Looks good to me!

Nice job.

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View kolwdwrkr's profile

kolwdwrkr

2821 posts in 3952 days


#2 posted 08-30-2008 05:29 AM

Looks good from here. Wish you had pictures that were closer and more detailed. Thanks for posting

-- ~ Inspiring those who inspire me ~

View JerseyJoe's profile

JerseyJoe

63 posts in 3918 days


#3 posted 08-30-2008 05:56 AM

Thanks Lee, Kolwdwrkr.

The only camera I had at the time was Film at at the time, so this was a scan, but I agree on the detail.

Thanks Joe

-- Joe Massanova, Somerdale, NJ - www.novawoodworking.com

View Callum Kendall's profile

Callum Kendall

1918 posts in 4065 days


#4 posted 08-30-2008 10:58 AM

Great job!

Thanks for the post

Callum

-- For wood working podcasts with a twist check out http://thetimberkid.com/

View griff's profile

griff

1207 posts in 4123 days


#5 posted 08-30-2008 11:45 AM

Beautiful, Joe. Very good build.

-- Mike, Bruce Mississippi = Jack of many trades master of none

View Bigbuck's profile

Bigbuck

1347 posts in 4025 days


#6 posted 08-30-2008 04:01 PM

Very nice, looks great.

-- Glenn, New Mexico

View WhattheChuck's profile

WhattheChuck

357 posts in 3922 days


#7 posted 08-30-2008 06:31 PM

Nice—boy, that looks like a lot of very PHYSICAL work!

-- Chuck, Pullman, WA

View scarpenter002's profile

scarpenter002

617 posts in 4266 days


#8 posted 08-30-2008 09:13 PM

It looks beautiful Joe. I wish you would post a few more pictures with higher resolution.

-- Scott in Texas

View rilanda's profile

rilanda

174 posts in 2516 days


#9 posted 07-30-2012 09:23 AM

Looks good Joe, know about the camera, been there done that so to speak. What timber did you use and how did you finish it?

-- Bill, Nottingham. Remember its not waiting for the storm to end, but learning to dance in the rain that counts. If you dont make mistakes, you make nothing at all.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com