| Project by jimmy meeker | posted 01-03-2014 06:44 PM | 1935 views | 3 times favorited | 4 comments |  |
 |
this is my first out feed table.I thought it would be big enough? and it is for now.
but i will be building my self another one. later on down the road. to fit the length
of my table saw. and it will be bigger and better.i have learned from my first one. not what to do and to do
table is made of mdf and trim poplar and legs are made of rustic hickory and the other wood is pine
-- jrm123
4 comments so far
mariva57
home | projects | blog
666 posts in 3012 days
#1 posted 01-03-2014 08:12 PM
I’ve been wanting to built one myself. Looks great.
-- The common man thinks. The wise man is silent. The stupid man discusses.
whitebeast88
home | projects | blog
4128 posts in 3198 days
#2 posted 01-04-2014 03:22 AM
great outfeed,it’ll be very handy.been wanting to build one myself,one day i hope.
-- Marty.Athens,AL
kykyle
home | projects | blog
11 posts in 2625 days
#3 posted 01-04-2014 04:16 PM
Great looking outfeed table! Any advice on attaching it to the saw/leveling it with the cast table? I have a Delta contractor table saw and plan to build an extension very soon…just collecting advice and input wherever I can!
Thanks
jimmy meeker
home | projects | blog
135 posts in 3004 days
#4 posted 01-18-2014 03:19 PM
yes i have the same saw 1. i attached angle across the back of table saw and 2.added 2×3 add the height and had to cut it down a little to work and then . then i made my out feed table to the size i wanted.but my next out feed table will be full length. good luck and if you have any more ? just ask and i will get back with you and sorry it took to so long to get back to you was having problems signing in
-- jrm123
Have your say...