LumberJocks

Wildlife Cutting Boards

  • Advertise with us
Project by scrollingmom posted 11-30-2013 03:40 PM 3418 views 7 times favorited 14 comments Add to Favorites Watch

Well I tried my hand at making cutting boards and here they are. They are not the traditional lots of pieces cutting boards but, I think they will do. They are made of two pieces of Maple, 1/2” and 1/4”. The inlay is 1/4” Walnut.

The Moose is 15 3/4” long by 8 1/2” wide by 3/4” thick. The Bear is approximately 10 1/2” round at the long end 13” long and 3/4” thick. I adjusted the shapes of the pattern to my own likes.

The pattern was created by Dale and Jeff Taylor and came out of the magazine Scroll Saw Woodworking & Crafts, Fall 2013.

-- Kelly, Allen,KS





14 comments so far

View Sheila Landry (scrollgirl)'s profile

Sheila Landry (scrollgirl)

9239 posts in 3430 days


#1 posted 11-30-2013 03:40 PM

Wow! These are really impressive! Beautiful work! :)

Sheila

-- Designer/Artist/Teacher. Owner of Sheila Landry Designs (http://www.sheilalandrydesigns.com) Scroll saw, wood working and painting patterns and surfaces. "Knowledge is Power"

View Jim Jakosh's profile

Jim Jakosh

23374 posts in 3615 days


#2 posted 11-30-2013 04:18 PM

Those are really neat, Kelly. Nice work on them. They are too nice to cut on!!............Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View jaykaypur's profile

jaykaypur

4017 posts in 2918 days


#3 posted 11-30-2013 04:33 PM

Beautiful work and I agree with you…..I think they will do!!!!!!

-- Use it up, Wear it out --------------- Make it do, Or do without!

View Celticscroller's profile

Celticscroller

1284 posts in 2583 days


#4 posted 11-30-2013 05:07 PM

I love the way the grain on the walnut adds detail to the inlays. Beautifully done.

-- Anna, Richmond BC

View hoss12992's profile

hoss12992

4152 posts in 2403 days


#5 posted 11-30-2013 05:32 PM

Absolutely love them. Great job

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View grizzman's profile

grizzman

7836 posts in 3813 days


#6 posted 11-30-2013 06:06 PM

wow, your really tugging at my heart strings, those are beauties, and you did a fantastic job…yep…love em

-- GRIZZMAN ...[''''']

View oakwood's profile

oakwood

327 posts in 2579 days


#7 posted 11-30-2013 09:15 PM

I luv em. How did you do the inlay? I would be very interested in making these. Router? chisel? Knife? Lovely work. Thanks for posting.

View Richard's profile

Richard

11307 posts in 3542 days


#8 posted 12-01-2013 12:17 AM

Very Nice Work Indeed! Thanks For Sharing!

Rick

-- Richard (Ontario, CANADA)

View scrollingmom's profile

scrollingmom

1196 posts in 2974 days


#9 posted 12-01-2013 03:25 AM

Thank you everyone. Always enjoy hearing your comments.

-- Kelly, Allen,KS

View Monte Pittman's profile

Monte Pittman

30441 posts in 2848 days


#10 posted 12-01-2013 03:30 AM

Really awesome job

-- Nature created it, I just assemble it.

View lanwater's profile

lanwater

3113 posts in 3444 days


#11 posted 12-01-2013 04:13 AM

Great job on those cutting boards. The y look great and they will do very nicely.

Well done!

-- Abbas, Castro Valley, CA

View paul44224's profile

paul44224

68 posts in 3013 days


#12 posted 12-02-2013 10:14 AM

They really look great, Kelly!

Paul

-- Paul, http://www.flickr.com/photos/woodworks44224

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 2802 days


#13 posted 12-02-2013 05:26 PM

Very nicely done!

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View Roger's profile

Roger

21011 posts in 3314 days


#14 posted 12-07-2013 01:17 PM

Way kool, Kelly

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com