| Project by BobWemm | posted 11-20-2013 11:05 AM | 1937 views | 0 times favorited | 7 comments |  |
 |
I finished both these pens yesterday, the Banksia blank is a resifill and I had a small tearout at the top of the bottom section. A bit of thought and I decided that I could rectify this by cutting the torn piece from the tube and fitting a piece of Ebony. That way it would match up with the Gold and black centre band.
The JD is from the US and they are both sanded up to 1800grit and finished with CA.
Hope you enjoy these and thanks for looking.
C & C welcome as usual.
Bob.
-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.
7 comments so far
stefang
home | projects | blog
17040 posts in 4305 days
#1 posted 11-20-2013 11:21 AM
Both great, but the banksia one is spectacular!
-- Mike, an American living in Norway.
aussiedave
home | projects | blog
3114 posts in 2795 days
#2 posted 11-20-2013 12:09 PM
The Banksia looks great…both pens are really nice…keep up the good work.
-- Dave.......If at first you don’t succeed redefine success....
woodshaver Tony C
home | projects | blog
7819 posts in 4324 days
#3 posted 11-20-2013 01:38 PM
Love them both especially the Banksia. Nice save! Nice work!
-- St Augustine FL, Experience is the sum of our mistakes!
Bob Collins
home | projects | blog
2845 posts in 4655 days
#4 posted 11-20-2013 11:38 PM
Nice pair of pens Bob, and a good save with the repairs. Well done.
-- Bob C, Australia. Your best teacher is your last mistake.
Ken90712
home | projects | blog
17919 posts in 4160 days
#5 posted 11-21-2013 02:18 PM
Awesome work….
-- Ken, "Everyday above ground is a good day!"
Rockbuster
home | projects | blog
499 posts in 3579 days
#6 posted 11-21-2013 10:44 PM
Like them both Bob, but leaning heavily on the Banksia, what did you use to fill the holes with? Since you already have my home address, you know where to send the Banksia one
-- Rockbuster,Ft. Wayne,In It is far better to remain silent, and appear the fool, than it is to open ones mouth, and remove all doubt.
BobWemm
home | projects | blog
2923 posts in 2897 days
#7 posted 11-22-2013 12:32 AM
Don, it was all filled with resin when I got the blank.
Do you like it that much??
-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.
Have your say...