| Project by MrStyle | posted 09-04-2013 07:18 PM | 1315 views | 1 time favorited | 4 comments |  |
 |
I made this table for my wife as a craft table for her scrapbooking hobby. It is my first attempt at anything beyond rough construction quality.
The table is made of 2×4’s for the base and a 3/4 in baltic birch plywood for the top. I selected these materials since they are cheap which allowed me to toss out bad mistakes ( just once !)
There is also a 1*3 pine edging that is attached via dowels/glue. Also my first attempt at mitered corners etc…
The only screws are to attach the base to the table top.
4 comments so far
Tector
home | projects | blog
51 posts in 2480 days
#1 posted 09-05-2013 12:55 AM
Nice Job! Congrats on your first project. Looking forward to seeing more.
RichCMD
home | projects | blog
417 posts in 2270 days
#2 posted 09-05-2013 12:58 AM
I hope she is happy with it, because I think she will be using this for a long, long time. You’re off to a good start.
-- Ride the bevel!
MrStyle
home | projects | blog
87 posts in 2059 days
#3 posted 09-05-2013 01:17 AM
She is so happy with it she ordered another one that is a little taller as a storage table area…..
Fishinbo
home | projects | blog
11362 posts in 2504 days
#4 posted 09-09-2013 02:56 PM
It looks good and well made. I’m sure it will serve your wife very well for a long time. Great job!
Have your say...