Carving knives

  • Advertise with us
Project by Jimthecarver posted 09-03-2013 06:18 PM 2037 views 4 times favorited 12 comments Add to Favorites Watch
Carving knives
Carving knives No picture No picture No picture No picture No picture
Zoom Pictures

Just finished up a couple of knives and gouges for a friend.
Gouges are turned from mahogany and knives are from some left overs from a cutting board, then laminated to black walnut for the center.
Finished in poly.
Blades are also hand made and ground to fit the carvers needs.
Hopefully she will like them.
Thanks for viewing
God bless

-- Can't never could do anything, to try is to advance.

12 comments so far

View MShort's profile


1798 posts in 4658 days

#1 posted 09-03-2013 06:31 PM

Sweet looking knives Jim. Nice shape on the handles and the cutting edges look very sharp and ready to use.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View Spoontaneous's profile


1340 posts in 4570 days

#2 posted 09-03-2013 06:41 PM

Jim…. those are beautiful. I would not even know how to start making a carving knife (or use one). But these sure make me want to try. You can leave ‘hope’ out of it. She will LOVE them!

-- I just got done cutting three boards and all four of them were too short. (true story)

View mpounders's profile


1008 posts in 4135 days

#3 posted 09-03-2013 08:09 PM

Look like beauties and I know they’re sharp!

-- Mike P., Arkansas,

View ScaleShipWright's profile


253 posts in 3125 days

#4 posted 09-03-2013 08:37 PM

Very nice carving knives!

-- God exists... But relax, He's not you!

View HillbillyShooter's profile


5811 posts in 3532 days

#5 posted 09-03-2013 09:35 PM

Beautiful carving knives—well done!

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View MichaelA's profile


778 posts in 4128 days

#6 posted 09-03-2013 11:36 PM

Great looking tools Jim. The look very beautiful but they look like they can withstand some serious abuse and would be very comfortable to handle!!

-- The best and most beautiful things in the world cannot be seen or even touched. They must be felt with the heart. "Helen Keller"

View Jimthecarver's profile


1124 posts in 5025 days

#7 posted 09-04-2013 01:27 PM

Thanks everyone
Terry I think you should have one in your collection… a pm could fix that. The best way to learn is by having one. But I’m sure you wouldn’t have any problems using them.
Mike I hope those knives are holding up for you.
Thanks again for all the comments.

-- Can't never could do anything, to try is to advance.

View Roger's profile


21055 posts in 4044 days

#8 posted 09-04-2013 02:22 PM

Very fancy. Nicely done.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View helluvawreck's profile


32122 posts in 4106 days

#9 posted 09-04-2013 02:25 PM

Jim, these will make a wonderful gift and you sure have done a fine job on them.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View natenaaron's profile


442 posts in 3037 days

#10 posted 09-04-2013 06:48 PM

Very nice. You said you made the blades too? How, if you don’t mind my asking. That seems like a huge skill set in and of itself.

View Jimthecarver's profile


1124 posts in 5025 days

#11 posted 09-04-2013 07:12 PM

Nate….your correct. Learning to make blades was a huge challenge to overcome. After getting the correct tools to produce the blades it is much easier.

-- Can't never could do anything, to try is to advance.

View Fishinbo's profile


11362 posts in 3415 days

#12 posted 09-06-2013 04:58 PM

Beautiful tools! Like the pretty wood combo and great finish. I’m sure they will handle the job well. Great work!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics