Simple Shop work Bench

  • Advertise with us
Project by Arnoldlee posted 08-12-2013 06:59 AM 2210 views 2 times favorited 4 comments Add to Favorites Watch
Simple Shop work Bench
Simple Shop work Bench No picture No picture No picture No picture No picture
Zoom Pictures

Just a simple 8 foot workbench with a nice shelf on the bottom. Made of 2×4’s and fiber board in 4×8 sheets. Power strip was an add on from Harbor Freight.

-- Arnold Lee

4 comments so far

View Jofa's profile


272 posts in 2925 days

#1 posted 08-12-2013 01:58 PM

Nice. Looks like it would be great in a shop like mine where I store my tools under my bench. I’d like to get mine off the ground and this would work. Great job.

-- Thank you Lord for the passion and ability to make things from your creation.

View MT_Stringer's profile


3183 posts in 4318 days

#2 posted 08-12-2013 06:08 PM

It turned out nice. You should get a lot of use out of it.
I think you should have figured in some overhang so you can clamp stuff.

Another option would be to drill 3/4 inch holes in the top and/or rout some openings so everyday common quick release bar clamps can fit through. Something similar to what Todd did. It would make your work much easier.

-- Handcrafted by Mike Henderson - Channelview, Texas

View whitebeast88's profile


4128 posts in 3277 days

#3 posted 08-12-2013 11:13 PM

great bench,you should get a lot of use out of it.thanks for sharing.

-- Marty.Athens,AL

View ClassicHauler's profile


13 posts in 2787 days

#4 posted 10-04-2013 10:47 PM

Great looking bench, it looks like its pretty strong and simple. Exactly what I need to build myself.

-- Doug, Italy

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics