Free Comfortable 2x4 Bench Plans (June 2013)

  • Advertise with us
Project by JSB posted 06-29-2013 02:20 PM 12266 views 27 times favorited 15 comments Add to Favorites Watch
Free Comfortable 2x4 Bench  Plans (June 2013)
Free Comfortable 2x4 Bench  Plans (June 2013) No picture No picture No picture No picture No picture
Zoom Pictures

Hello folks! This week I have a complete tutorial and free downloadable plan for my 2×4 sitting benches. This was my first post here on lumberjocks. I always get a good response from these locally and a lot of people have shown interest on my website so I figured it would be a good time to make a free plan for them. The bench can be built out of 8 8’ 2×4s. Each side table is 2 2×4s. Here is a short video tutorial for the build. If you would like to download a copy of the plans you can click the link in the YouTube description to go to my website. I hope some of you can make a couple and sell them. I have been selling this exact bench for 4 years. Have a great weekend folks!

Link to the video:

A link to the plans is in the YouTube description.

-- Jay -

15 comments so far

View Monte Pittman's profile

Monte Pittman

30458 posts in 2873 days

#1 posted 06-29-2013 02:47 PM

I like the idea that you try to make them simple without making it look cheap. I could use a comfortable bench right now. :-)

-- Nature created it, I just assemble it.

View 308Gap's profile


337 posts in 3537 days

#2 posted 06-29-2013 04:42 PM

Very useful Thanks Jay.

-- Thank You Veterans!

View Timthemailman's profile


330 posts in 3311 days

#3 posted 06-29-2013 09:56 PM

Thanks for another great video, Think I will try my hand at it.

View whitebeast88's profile


4128 posts in 2725 days

#4 posted 06-29-2013 10:37 PM

great video jay as always,i like the design of this bench and will try to build one soon.

-- Marty.Athens,AL

View aussiedave's profile


3114 posts in 2359 days

#5 posted 06-29-2013 11:44 PM

Nice simple and good looking project…..thanks for the video.

-- Dave.......If at first you don’t succeed redefine success....

View MShort's profile


1797 posts in 3953 days

#6 posted 06-30-2013 02:02 AM

That is awesome Jay. Thanks for the video !!!!!!

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View jacen68's profile


54 posts in 3561 days

#7 posted 06-30-2013 03:02 AM

I’m a little behind on my youtube subscriptions, looking forward to viewing this one. I can’t thank you enough for making sketchup a lot easier for us.

-- So much to do, so little time.

View Roger's profile


21013 posts in 3338 days

#8 posted 06-30-2013 11:30 AM

Nice build, Jay

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View AngieO's profile


1267 posts in 2682 days

#9 posted 06-30-2013 02:51 PM

Thanks for the video. I have to try making some outdoor furniture for myself. Everytime I think about buying some plastic set… I think of your videos. Just need to invest that money into some 2×4’s instead. Video was helpful. Now I need to go get the plans and see if I have 8 2×4’s. :) (or enough scraps to get the cut list)

View Dusty56's profile


11852 posts in 4222 days

#10 posted 06-30-2013 03:20 PM

Very nice. Thanks for the video and plans : )

-- I'm absolutely positive that I couldn't be more uncertain!

View koren's profile


2 posts in 2350 days

#11 posted 06-30-2013 11:47 PM

Very Nice!!!

View terry603's profile


321 posts in 3448 days

#12 posted 07-01-2013 03:25 PM

very nice..thx

-- may not always be right,but,never in doubt.

View Knothead62's profile


2600 posts in 3496 days

#13 posted 07-01-2013 04:43 PM

Got it marked as a Favorite. I need to make one! Did you use regular 2X4s or treated wood? Do you finish them with anything?

View JSB's profile


737 posts in 2613 days

#14 posted 07-01-2013 07:24 PM

Knothead62 – You can use whatever you want. This build was with non treated wood. If you are going to have it under a roof you can get away with non treated. If you are going to have it out on the grass where water will be absorbed through the feet I would go with treated. I also use Thompsons Water Sealer with good results when I build with non treated lumber.

-- Jay -

View Fishinbo's profile


11362 posts in 2710 days

#15 posted 07-02-2013 01:36 PM

It looks good, well crafted and has a simple design that’s why it’s a hit. Great job and great video, thanks for sharing!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics